Shipping throughout Russia and to other countries

Sheet bending machines LAM, LM, etc.

Sheet bending machines and machines: LAM 1350, LAM 1550, LAM 2550, LAM 3050, LAM 1350, LAM 1550, LAM 2050, LAM 2500, LAM 3000, LM 1350, LM 1550, LM 2050, LM 2550, LM 3050, etc. Electromechanical CNC bending machines with a rotary beam.

The electromechanical bending machine is designed to perform edge bends, shaped parts, finishing elements for roofs, facades, closed boxes for ventilation, for the production of facade cassettes, skates, ends, wind slats, slats, visors and caps on fences, tides and much more. The electromechanical CNC bending machine with a rotary beam works with cold-rolled sheet metals, galvanized steel with a polymer coating, copper and aluminum sheets with a metal thickness of up to 1.5 mm.

Electromechanical sheet bends of the LEM series.

The electromechanical bending machine is designed to perform edge bends, shaped parts, finishing elements for roofs, facades, closed boxes for ventilation, for the production of facade cassettes, skates, ends, wind slats, slats, visors and caps on fences, tides and much more. The electromechanical bending machine works with cold-rolled sheet metals, galvanized steel with a polymer coating, copper and aluminum sheets up to three meters long and metal thickness up to 2.5 mm. The electromechanical bending machine has a powerful bed, an automatic clamping segment beam with an electric drive, a rotary type bending beam with an electric drive, a control cabinet with a foot control connected to it for ease of operation (double pedal). In this model of automatic segment bending, the bending segments are arranged horizontally rather than vertically, which allows the bending machine to bend parts at an angle of 135 °. Electromechanical sheet bends are produced in five versions, with a working width of 1350-3000 mm.

Manual mechanical sheet bends of the LM series.

The bending machine is designed for performing edge bends, the production of shaped parts, finishing elements for roofs, facades, closed boxes for ventilation, for the production of facade cassettes, skates, ends, wind slats, slats, canopies and caps on fences, tides and much more. Segmental sheet bends of this series have a powerful bed, a clamping segment beam with an eccentric type clamp, and a bending beam of a rotary type. There are also all the necessary micro-adjustments for different metal thicknesses. In this model of a manual sheet bending type, the bending segments are arranged horizontally rather than vertically, which allows bending parts at an angle of 165º and, if necessary, bending up to 180º using an upper clamping beam or a lower rotary beam. One of the advantages of our segment bending machine is a large number of different width set segments (bending knives) – 16 pcs.(varieties).

DOCUMENTS

All products

The group "New Technologies" offers for review the products: machines, guillotines, sheet bends, unwinders, presses, unwinders, corrugated board production lines
  • Production of metal siding
    Production of metal siding
    Smooth siding, timber, etc.
  • Production of profiled flooring
    Production of profiled flooring
    C-8, C-10, C-18, C-21, etc.
  • Folding machines
    Folding machines
    FPS1, FZI, etc.
  • Longitudinal and transverse cutting
    Longitudinal and transverse cutting
    APR, APPR, etc.
  • Production of N/A/Z profiles
    Production of N/A/Z profiles
    27*28, 60*27, Crab, etc.
  • Production of metal tiles
    Production of metal tiles
    Monterrey, Super, Maxi, etc.
  • Guillotines
    Guillotines
    GEM1300x1, GEM3000x2, etc.
  • Sheet bending machines
    Sheet bending machines
    LAM, LM, etc.
  • Sheet bending machines with CNC
    Sheet bending machines with CNC
    ALE-LPGS, ALE-LPGS, LPP, etc.
  • Angle-cutting presses
    Angle-cutting presses
    UGPU, UPP, UMP, etc.
  • Roll Unwinders
    Roll Unwinders
    RMD 8, KR, KRG, etc.
  • Production of a picket fence type profile
    Production of a picket fence type profile
    Picket profile, etc.

About

The company produces various roll forming equipment, machine tools and processing lines without resorting to the help of third-party organizations, which makes it independent in its business.

  • production

    The total area of the company's buildings is 3,600 sq. m. The new modern workshops are equipped with crane beams with a lifting capacity of up to 10 tons and all the necessary fleet of modern equipment.

  • LOW PRICE

    The company can offer its customers a lower cost for products than similar companies that do not have their own machine park.

  • PERSONAL DEVELOPMENTS

    The company employs qualified engineers who are constantly developing new solutions for the needs of customers.

Information Board

Learn more about our products.
  • Equipment questionnaire
    Equipment questionnaire

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: